Stonex S6 Replacement Survey Equipment Charger

S6

for Stonex GNSS S6 GPS

1.Make sure the Stonex S6 adapter and cables are dry before connecting to the laptop or wall outlet.

2.Plug the AC adapter into the laptop. Check to see if the charge indicator is lit. If it lights up that means the laptop can recognizes it.

3.Due to the length of their cables,Stonex S6 adapters can easily become safety hazards. To prevent people from tripping, make sure your power adapter's cables are never off the floor.

4.Using an AC power adapter that is not compatible with your laptop can damage the battery. Using voltage that is too low can force the laptop to rely partially on the battery. Too much voltage can destroy the battery.

5.Be certain that the adapter for Stonex S6 is properly connected to the power port, as a loose connection canprevent the laptop from recognizing the adapter.

6.The Stonex S6 Survey Equipment Charger plug for a laptop has to be cleaned when the plug appears dirty or corroded, or if the battery indicator blinks on and off intermittently, indicating a bad connection between the AC plug and the laptop jack. It will also take difficult for the AC adapter to recharge the laptop battery if the connection is going bad.

7.Problems with the laptop battery can affect the performance of the power adapter. If the battery is defective, the laptop may not recognize the power Stonex S6 adapter.

8.As with laptops, which are typically placed inside laptop bags or padded envelopes, Stonex S6 Survey Equipment Charger should be stored properly when not in use. The charger must never be exposed to extreme temperatures, such as those on a car's dashboard in the middle of summer or dead of winter.

Tags:Stonex S6 Survey Equipment Charger ,Cheap S6,S6 SG adapter,Stonex S6 Chargers, Stonex S6,replace S6 ,rechargeable S6,Stonex GNSS S6 GPS.