GeoMax CH-04 Replacement Survey Equipment Charger

CH-04

for GeoMax Zenith 15RTK ZBA700

1.Make sure the GeoMax CH-04 adapter and cables are dry before connecting to the laptop or wall outlet.

2.Plug the AC adapter into the laptop. Check to see if the charge indicator is lit. If it lights up that means the laptop can recognizes it.

3.Due to the length of their cables,GeoMax CH-04 adapters can easily become safety hazards. To prevent people from tripping, make sure your power adapter's cables are never off the floor.

4.Using an AC power adapter that is not compatible with your laptop can damage the battery. Using voltage that is too low can force the laptop to rely partially on the battery. Too much voltage can destroy the battery.

5.Be certain that the adapter for GeoMax CH-04 is properly connected to the power port, as a loose connection canprevent the laptop from recognizing the adapter.

6.The GeoMax CH-04 Survey Equipment Charger plug for a laptop has to be cleaned when the plug appears dirty or corroded, or if the battery indicator blinks on and off intermittently, indicating a bad connection between the AC plug and the laptop jack. It will also take difficult for the AC adapter to recharge the laptop battery if the connection is going bad.

7.Problems with the laptop battery can affect the performance of the power adapter. If the battery is defective, the laptop may not recognize the power GeoMax CH-04 adapter.

8.As with laptops, which are typically placed inside laptop bags or padded envelopes, GeoMax CH-04 Survey Equipment Charger should be stored properly when not in use. The charger must never be exposed to extreme temperatures, such as those on a car's dashboard in the middle of summer or dead of winter.

Tags:GeoMax CH-04 Survey Equipment Charger ,Cheap CH-04,CH-04 SG adapter,GeoMax CH-04 Chargers, GeoMax CH-04,replace CH-04 ,rechargeable CH-04,GeoMax Zenith 15RTK ZBA700.